Home configure

configure

24 Articles

AVR #5. I2C Master PART 1 || Configuration

This tutorial covers how to configure the AVR MCU as the I2C Master. We will also transmit the data to the slave device...

AVR #4. How to receive data via UART || Interrupt

This tutorial covers how to configure UART in AVR MCU, and how to receive the data via the uart using the interrupt..

ATtiny817 Xplained mini || Clock setup || LED Blink

This tutorial covers how to setup the first project in the microchip atudio for the AVR ATtiny817 xplained mini board and blink the...

STM32 ETHERNET #6.2 HTTP WEBSERVER CGI

This tutorial will cover how to use the CGI (Common Gateway Interface) to send the data from HTTP server to the MCU..

STM32 ETHERNET #6.1 HTTP WEBSERVER SSI

This tutorial will cover how to use the SSI (Server Side Include) to send the data from the MCU to the http webserver...

STM32 ETHERNET #6. HTTP WEBSERVER SIMPLE

This is 6th Tutorial in the ethernet series, and today we will see how to use our STM32 to create a HTTP Webserver...

STM32 ETHERNET #5. TCP CLIENT

This is the 5th tutorial in the STM32 ethernet series, and in this tutorial will cover how to set the STM32 as the...

STM32 ETHERNET #4. TCP SERVER

This it the fourth tutorial in the STM32 Ethernet series, and today we will see how to configure the STM32 as TCP Server...

STM32 ETHERNET #3. UDP CLIENT

This is the 3rd tutorial in the STM32 Ethernet series and today we will see how to configure the STM32 as the UDP...