Interfacing ADXL345 Accelerometer with STM32 via I2C – Complete Tutorial with Code
Learn how to interface the ADXL345 3-axis accelerometer with STM32 using I2C. This step-by-step tutorial…
STM32 Tutorials – Learn STM32 Programming with HAL, LL, and Bare Metal
This section provides step-by-step STM32 tutorials and tested code for learners ranging from beginners to experts. Programming is demonstrated in STM32CubeIDE using both HAL and LL drivers, making the examples easy to follow and adapt. The coverage spans GPIO, ADC, UART, timers, PWM, I2C, SPI, CAN, Ethernet, DMA, memories, displays, sensors, and many other peripherals—ideal for anyone looking to gain practical experience and develop reliable hardware projects.
STM32 Peripherals
Step-by-step STM32 guides using HAL covering essential peripherals like UART, SPI, I2C, ADC, DMA, CAN, and GPIO, with practical examples and code for beginners and advanced developers.
STM32 UART PART 9 – Lin Protocol PART 2
In this tutorial we will see how to use the Lin Transceivers to communicate between…
SPI Communication with STM32 using HAL – Complete Tutorial with Code Examples
This tutorial explains how to configure and use the SPI peripheral on STM32 using HAL….
STM32 as I2C SLAVE || PART 2
This is the 2nd tutorial in the series, which covers how to write an I2C…
STM32 SPI Tutorial Using Registers (Full-Duplex Master with ADXL345)
Learn STM32 SPI register-level programming. Master SPI1 configuration, transmit & receive data, and interface with…
How to communicate between HC-12 using STM32
This tutorial will cover how to communicate between STM32 MCUs using the HC-12 Module. We…
STM32 ADC PART 7 – ADC External Trigger Source Selection
Learn to configure STM32 ADC external trigger using timers for precise sampling control. Includes CubeMX…
STM32 ADC Part 1 – Single Channel Polling Mode
Learn how to configure STM32 ADC in single channel polling mode, read analog input using…
STM32 Programming using Registers
Learn STM32 register-level programming with clear explanations and examples, covering GPIO, timers, interrupts, communication interfaces, and more.
No post found!
STM32 Display Tutorials
Explore STM32 display guides with step-by-step guides on interfacing LCD, OLED, and TFT screens, including graphics, text rendering, and practical examples.
Display Analog Clock on GC9A01 Using STM32 + LVGL + SquareLine Studio (Part 2)
Learn how to display an analog clock on the GC9A01 round display using STM32 and…
TouchGFX #3. Sending data to UI || MVP
This tutorial covers how to send the data from MCU to the UI in touchGFX….
Riverdi STM32 Display #2. LED Control using Buttons
This tutorial covers how to use the buttons on the GUI of the Riverdi STM32…
Arduino ST7920 Tutorial (128×64 LCD): Wiring, Setup, U8g2, and Text Display Guide
A complete beginner-friendly guide to using the ST7920 128×64 LCD with Arduino. Covers wiring in…
How to Interface LCD1602 with TM4C123G Tiva C Using I2C (Full Guide with Code)
A complete guide to interfacing the LCD1602 over I2C with the TM4C123G Tiva C. This…
Interfacing ADXL345 Accelerometer with STM32 via I2C – Complete Tutorial with Code
Learn how to interface the ADXL345 3-axis accelerometer with STM32 using I2C. This step-by-step tutorial…
AVR #7. I2C Master PART 3 || Interface LCD1602 via I2C
This tutorial covers how to use the AVR MCU as the I2C Master and send…
Riverdi STM32 Display #3. Send data from UART to UI
This tutorial covers how to receive the data using UART in a Riverdi STM32 Display…
STM32 Timer Series
Master STM32 timers with practical tutorials on PWM, input capture, output compare, interrupts, and advanced timer features for real projects.
No post found!
STM32 Ethernet Tutorials
Learn STM32 Ethernet programming with step-by-step guide on LAN configuration, TCP/IP, UDP, and real-world networking examples.
STM32 Ethernet PART 3 – How to Configure UDP Client
This is the 3rd tutorial in the STM32 Ethernet series and today we will see…
STM32 Ethernet PART 7 – UDP Server using LWIP NETCONN (RTOS)
This tutorial will cover how to use STM32 Ethernet with Free RTOS using LWIP and…
STM32 Ethernet with Mongoose | Part 3 Weather Station
Create a weather station using STM32 and the Mongoose library. Learn to read sensor data…
STM32 Ethernet PART 4 – How to Configure TCP Server
This it the fourth tutorial in the STM32 Ethernet series, and today we will see…
STM32 Ethernet PART 8 – UDP Client using LWIP NETCONN (RTOS)
How to use STM32 as Ethernet UDP Client using NETCONN with Free RTOS and LWIP….
STM32 Ethernet PART 12 – HTTP Server using AJAX PART2
In this tutorial, we will see how to reload a specific part of the webpage…
STM32 Ethernet PART 5 – How to Configure TCP Client
This is the 5th tutorial in the STM32 ethernet series, and in this tutorial will…
STM32 Ethernet PART 6 – How to Configure Simple HTTP Webserver
This is 6th Tutorial in the ethernet series, and today we will see how to…
STM32 RTOS Series
Step-by-step STM32 RTOS tutorial series covering FreeRTOS setup, tasks, queues, semaphores, and real-time project examples.
No post found!
STM32 Memories
Understand STM32 memories with guides on Flash, SRAM, EEPROM, and external memory interfacing, explained with code examples.
No post found!