uart
TouchGFX #5. Data from UART to UI
This tutorials covers how to display the data, received from the UART, to the UI in STM32 using the touchGFX...
Modbus #7. STM32 as Slave || Writing Coils
This tutorial will cover how the STM32 as a modbus slave device will response to the queries regarding writing a single and multiple...
Modbus #6. STM32 as Slave || Write Registers
This tutorial will cover how the STM32 as a modbus slave device will response to the queries regarding writing Registers.
Modbus #5. STM32 as Slave || Read Coils and Inputs
This tutorial will cover how the STM32 as a slave device will send a response to the queries regarding reading Coils and Discrete...
Modbus #4. STM32 as Slave || Read Holding and Input Registers
This tutorial will cover how the STM32 as a modbus slave, that will send a response to the queries regarding reading registers...
Modbus #3.1 STM32 Master Writes Multiple Coils and Registers
This is another tutorial in the Modbus series and today we will see how the STM32 as master Writes multiple coils and Holding...
Modbus #3. STM32 Master Writes single Coil and Holding Register
Today in the modbus series we will see how to use the STM32 as the master, which will Force a single coil and...
Modbus #2. STM32 Master Reads Coils and inputs
This is second tutorial in the Modbus series and today we will see how to use the STM32 as the master to read...
Modbus #1. STM32 Master Reads Holding and Input Registers
How to use the STM32 as the master requesting the data from the holding registers and input registers from the slave device..
