slave → ControllersTech®

STM32 UART #10 || Lin Protocol PART 3

In this tutorial we will see how to STM32 as master and slave communicate with each other via the linbus. The master sends...

In this tutorial we will see how to use the Lin Transceivers to communicate between 2 STM32 MCUs, the master and the slave....

This tutorial covers how to use the AVR MCU as the I2C Master and read data from the I2C slave. We will use...

This tutorial covers how to use the AVR MCU as the I2C Master and send data to the LCD1602, which is connected via...

This tutorial covers how to configure the AVR MCU as the I2C Master. We will transmit the data to the PCF8574 and control...

This tutorial covers how to configure the AVR MCU as the I2C Master. We will also transmit the data to the slave device...

This tutorial covers the setup of HC-05 in the master and slave modes. Also how STM32 controllers can communicate with each other using...

This tutorial will cover how to update the data in a sector or number of sectors in the W25Q flash.

This is the 3rd tutorial in the series covering W25Q Flash memories. Today we will cover how to erase a sector or number...