mode → ControllersTech®

LVGL on STM32 || PART7 || Load LVGL from Ext Flash

This tutorial for LVGL on STM32 covers how to run the LVGL application from the External flash memory, W25Q connected via the QSPI...

This tutorial covers how to configure the touch controller for the LCD connected via the FMC peripheral to the STM32. We will read...

This tutorial covers how to configure the FMC peripheral of the STM32 to interface a LCD in the16 bit parallel mode. We will...

In this tutorial we will see how to use the Lin Transceivers to communicate between 2 STM32 MCUs, the master and the slave....

This is the 7th tutorial in the STM32 UART Series. In this tutorial we will use the one wire protocol to interface the...

This is the 6th tutorial in the STM32 UART Series. In this tutorial we will communicate between 2 STM32 MCUs using single Wire...

This is the 5th tutorial in the STM32 UART Series. In this tutorial we will use the IDLE Line detection to receive the...

This is the 4th tutorial in the STM32 UART Series. In this tutorial we will use the DMA to receive the data in...

This tutorial will cover how to create an external loader for the W25Q Flash using the QSPI. We will also see how to...