Home configure

configure

24 Articles

STM32 ETHENRET #2. UDP SERVER

Create a new UDP control block using udp_new (). Bind the block to the local IP address and Port by using udp_bind

STM32 Ethernet #1. Connection

This tutorial is the start of the Ethernet series in STM32. Today we will simply see how to configure the Hardware and ping...

STM32 TIMERS #3. How to use the ENCODER Mode

This tutorial will cover How to use Incremental Encoder with STM32. Also we will see how can we control the angle in Servo...

DMA with ADC using Registers in STM32

In this tutorial, we will see how to use DMA in STM32. Here I will use the ADC along with DMA, without any...

SPI using Registers in STM32

This tutorial will cover how to use SPI using Registers in STM32. We will see how can we send and receive data in...

Interface WS2812 with STM32

In this tutorial, we will interface the WS2812/B LED with STM32. I am going to use PWM with DMA to send the data...

External Interrupt using Registers

This tutorial will cover how to configure the external interrupt using the Registers in STM32 MCUs. We will use the button, which is...

STM32F103 Clock Setup using Registers

This tutorial will cover Clock setup, Timer Setup for Delay, and GPIO configuration for STM32 F103 using the Register based programming.

STM32 I2C Configuration using Registers

This tutorial will cover both transmission and reception using the I2C and the configuration will remain common in both the processes.