STM32 ADC Part 1 – Single Channel Polling Mode
Learn how to configure STM32 ADC in single channel polling mode, read analog input using…
STM32 ADC Tutorials – HAL, DMA, IRQ & Conversion Modes
Explore the comprehensive STM32 ADC series through practical tutorials. Learn ADC configurations—single and multi-channel, DMA, interrupts, differential mode, reference voltage options, oversampling, injected conversions, external triggers, and timing analysis—with HAL code examples tested on actual hardware.
STM32 ADC Part 2 – Single Channel with Interrupt and DMA
Explore STM32 ADC Part 2. Read a single channel using Interrupt and DMA, configure CubeMX,…
STM32 ADC Part 3 – Multiple Channels with DMA Normal Mode
In this tutorial, we’ll explore how to use STM32 ADC with multiple channels and DMA…
STM32 ADC Part 4 – Multiple Channels with DMA Circular Mode
This tutorial explains how to configure STM32 ADC to read multiple channels continuously using circular…
STM32 ADC PART 5 – Multi‑Channel without DMA
Master STM32 ADC reading on multiple channels without DMA. Includes CubeMX setup and HAL C…
STM32 ADC PART 6 – ADC Conversion Time Explained
Uncover how to calculate and measure STM32 ADC conversion time. Includes sampling, resolution, ADC clock…
STM32 ADC PART 7 – ADC External Trigger Source Selection
Learn to configure STM32 ADC external trigger using timers for precise sampling control. Includes CubeMX…
STM32 ADC PART 8 – Injected Conversion Mode
Master STM32 ADC injected conversions for high‑priority sampling. Covers triggered & auto‑injection modes, CubeMX setup,…
STM32 ADC PART 9 – ADC Oversampling Technique
Boost STM32 ADC resolution with hardware oversampling. Step-by-step guide for STM32, including CubeMX config, VM…
STM32 ADC PART 10 – ADC Reference Voltage
Understand STM32 ADC reference voltage options: internal VrefINT or external VREFBUF via VDDA/VREF+. Includes CubeMX…
STM32 ADC PART 11 – Differential Mode Explained
Learn how to use STM32 ADC in differential mode to measure voltage differences between two…