UART have a feature called IDLE line detection and we are going to use this to sole the problem mentioned above. Idle line is detected on RX line when there is no received byte for more than 1 byte time length.
Servo motors use feedback to determine the position of the shaft, you can control that position very precisely. As a result, servo motors are used to control the position of objects, rotate objects, move legs, arms or hands of robots, move sensors etc. with high precision.
The process is pretty straight forward. We will set the data pin as input and count the number of times it goes high and low in 1 second and that will be the input frequency. I am using NE555 to generate different frequencies and DSO138 to compare the results to.
The ADXL345 is a complete 3-axis acceleration measurement system with a selectable measurement range of ±2 g, ±4 g, ±8 g, or ±16 g. It measures both dynamic acceleration resulting from motion or shock and static acceleration, such as gravity, which allows the device to be used as a tilt sensor. In this tutorial we are going to interface ADXL345 with STM32.